Fukuda, Mr Bell installation guide

Release date: 2012-11-28

Fukuda, Mr Bell installation guide

Warm prompt: before using this product, please read the installation guide

Installation note:

1, in order to safety and ensure the normal use of products, please to a sales professional staff to install this product, please do not disassemble the machine without permission. So as not to cause the machine damage and accidents.

2, start the engine before loading, check the auto meter function display, in-car button is normal operation, the car inside and outside surface had scratched phenomenon, if there are any problems, timely response to the customer.

Before 3, dismantling, installation personnel please remove carries on metal objects, and other hard objects to prevent in the process of disassembling for car seats or interior damage.

4, the installation process should put attention to remove the car components, to avoid scraping the float inside the instrument desk, when wiring clutter left by the timely processing, don't stay in the car. Must be properly insulating joint, to prevent short circuit.

5, to reasonable layout. In-car space is generally small, so try to reduce unnecessary materials, reduce the occupied space, make host is easy to install. Host connection wire, such as navigation, antenna, back plate box line, line, etc.) need to be well planned. To avoid running in the process of impact to the car's moving parts, such as the wheel drive shaft, the throttle and brake pedals vehicle control unit. Each wire needs to be fixed after go line, to prevent the loose.